亚洲中文无码在线观看|国产亚洲AV嫩草久久|av无码国产在线看岛国|亚洲国产永久免费播放片|久久一区二区免费不卡国产|亚洲AV永久无码精品网站|99久久久无码国产精品免费|久久久久久噜噜噜亚洲熟女综合

Baotou North Benz parts steering machine to compare the general inspection of several parts:
1, steering gear failure
By checking if found to be low power steering oil pressure exergy reason is heavy in the direction of the steering gear. At this time should be invited to professional manufacturers to repair. Generally speaking, the steering gear faults are mostly due to the Baotou North Benz parts piston, cylinder, piston ring or strain on the damage caused by the piston two cavity exergy boost pressure can not effectively establish the. In addition to a variety of exergy on the circumferential surface of the piston ring, the sealing ring on the steering screw breakage exergy will cause pressure unloading and boost pressure drop at the end of the exergy.
2, booster pump fault
Throughtheexperiment Baotou North Benz parts of the booster pump is not up to the standard value orientation obviously with this heavy exergy. First should check the flow control valve and the valve seat of the mesh surface, the safety valve ball is closed. If the flow valve or valve leakage can be repaired by grinding method of exergy. Second check the safety valve spring failure. This can be through the spring back method and check if the gasket exergy in the spring behind the increase in a gasket exergy maximum pump pressure increase exergy that spring failure. If the two parts are no problem should disassemble the cavity wall exergy exergy booster pump vane pump is to observe the wear and tear. Because the cavity wall injury will make the high and low pressure cavity exergy thereby causing pressure build up. The reason for the general strain is that the oil is dirty. If the direction is suddenly heavy exergy should check whether the pump shaft fracture is caused by.
3, Baotou Benz accessories tank back to the oil filter blockage in the oil storage tank return oil filter and long-term maintenance, replacement of exergy blockage caused by poor circulation to help the oil exergy exergy caused by back pressure increasing exergy will also make the direction of heavy.
4, the lack of oil system with air exergy
If the power system caused by the lack of oil system with air exergy exergy and exergy at this time not only heavy steering when turning and noise. At this point, according to the procedures for gas and gas exhaust can be.
The sealing ring 5, two limit valve failure of the piston cavity two exergy caused by power failure.