亚洲中文无码在线观看|国产亚洲AV嫩草久久|av无码国产在线看岛国|亚洲国产永久免费播放片|久久一区二区免费不卡国产|亚洲AV永久无码精品网站|99久久久无码国产精品免费|久久久久久噜噜噜亚洲熟女综合

CONTACT-US

Baotou North Benz accessories share with you truck drivers should know how to solve these problems

In fact, drivers all know that there will be all kinds of emergencies in the process of driving. Some experienced drivers can come up with solutions to these failures, but for some novice drivers, these failures are more difficult. The following brief sections will analyze what small failures will be encountered on the way. Don't encounter these failures at that time, and don't know what to do.

In the process of driving, the clutch of Baotou North Benz accessories suddenly became unable to be stepped on. What is the reason? How to solve such a situation? During the normal driving process of the vehicle, the clutch pedal suddenly cannot be pressed, which will also lead to the inability to engage the gear, making the vehicle unable to drive normally. At this time, it is necessary to check whether the clutch slave cylinder push rod has left the fork groove, because the push rod is out of the groove, which will cause the clutch to not be pressed.

If it is not the problem of the ejector pin, it is necessary to remove the observation port under the transmission to see if the transmission release bearing is burnt or damaged, or if the bearing circlip falls off, the damage of the release bearing will cause the clutch plate and the pressure plate not to separate directly. Next, check whether the clutch release fork and the screws connecting the base are loose or broken. This may also cause the clutch pedal to suddenly stop.

Then look at the clutch shaking when starting, and how to deal with it. The troubleshooting is very simple. You need to carefully check from the outside to the inside, and first check whether the front and rear pawl pads of the engine are damaged.

If the front pawl pad is damaged, it can be clearly seen at the fan blade at the front end of the engine. When starting, there is occasionally a friction sound. At this time, if the cab finds that the fan blade has the trace of scavenging the water tank air ring, it can be determined that the pawl pad is damaged. To eliminate the damage of the pawl pad, it is necessary to see whether it is the fault of the pressure plate, clutch plate and release bearing.

What's the "buzzing" sound of heavy vehicles? After many empty cars start, there is a problem with the steering direction. The steering wheel of Baotou North Benz is very heavy when the car is fully loaded with parts. Sometimes it can't be turned. You have to increase the throttle to turn it. There is a loud noise when the fuel door is filled. Most of the problems are due to the poor fuel supply caused by the lack of fuel in the power steering pump, which makes the driver feel that the steering is particularly heavy.

When adding the power assisted oil, you must check the filter element in the oil tank. If you do not replace it for a long time, it will cause blockage. If necessary, you should replace the filter element of Baotou North Benz accessories. If the steering pump and oil are OK, and the steering wheel is still very heavy, you should ask a professional technician to see if the steering gear is faulty.

Finally, we need to analyze the instability of the fuel rail of a lower limit pressure valve. What is the matter? When the car is driving at a high speed, I feel the accelerator is weak. This may be because the spring in the pressure limiting valve is weak, causing the car to lose power.

All cars now have a speed limit function. After the normal running in period, the speed limit will be lifted. Generally, after several years of use, the car will have a speed limit problem. No matter how to accelerate the accelerator speed, the maximum speed is 1500 rpm. If the problem still exists after replacing the pressure limiting valve, there are many reasons for the speed limit. First, check whether the engine metering unit is stuck when working, or if the circuit is aging and has a fault, Finally, we should consider whether a lower limit pressure valve is broken.

Disclaimer: The reprinted content comes from the network. If you have any objection, please contact the Baotou North Benz Parts Wholesale Export Network in time to delete it.